[Mar-2022] NS0-516 Exam Questions and Valid NS0-516 Dumps PDF
NS0-516 Brain Dump: A Study Guide with Tips & Tricks for passing Exam
NetApp NS0-516 Exam Topics:
| Section | Objectives |
|---|---|
| Hardware | -Describe the hardware components in an E-Series storage system. -Describe Fibre Channel, Ethernet, Infiniband and SAS cabling. -Describe the appropriate tasks for adding additional storage to an E-Series system. -Describe drive encryption features. |
| SAN | -Describe the end-to-end network configuration for Fibre Channel and Ethernet. |
| Storage Configuration | -Describe how to setup alerting and notification for the E-Series system. -Describe how to create and administer Volume Groups or DDP and associated volumes. -Describe physical and logical storage requirements. -Describe the setup of CHAP for an iSCSI environment. -Describe when to use DDP or Volume Groups. |
| Documentation | -Describe the process of reviewing and preparing a site for implementation of E-Series. -Describe the information you give a customer after deploying a solution. |
| Host Side | -Describe the different host connection options for E-Series systems. -Describe how to configure hosts for multipathing. |
| Troubleshooting | -Demonstrate the steps for troubleshooting an E-Series system. -Demonstrate how to analyze multipathing issues between a host and an E-Series system. |
| Protection | -Describe how Data Assurance with media scan protects your data. - Describe SANtricity data protection features. |
NEW QUESTION 12
The interval for an asynchronous mirror group should usually be equal to ______________. (Choose the best answer.)
- A. the corresponding application's RTO
- B. the amount of time required to copy the size of the mirror repository to the remote site
- C. half the corresponding application's RPO
- D. the corresponding application's RPO
- E. half the corresponding application's RTO
Answer: B
NEW QUESTION 13
What is represented by the Headroom graph on the SANtricity System Manager performance tab?
- A. the remaining performance capability of the physical objects in the storage system
- B. the percentage of I/O associated with the backend disk drives
- C. the percentage of CPU processing capacity that is being used by the operations on the system
- D. the resources that are being consumed by a defined workload
Answer: A
NEW QUESTION 14
What file on a Windows management host server contains information about the storage system management connections?
- A. mgmt.cfg
- B. EMWdata_vxx.bin
- C. the event log
- D. AMWcfg_vxx.bin
Answer: B
NEW QUESTION 15
The decision to use FC or iSCSI on the 5500 Controller with a 4-port 16Gb/s FC or 10Gb/s iSCSI Optical SFP+ HIC (Host Interface Card) can be ___________. (Choose the best answer.)
- A. changed at any time by SANtricity
- B. set at the factory, based on the order
- C. ignored because both can be used at the same time
- D. based upon the SFP type
Answer: D
NEW QUESTION 16
What would an E-Series system customer use to determine when a specific volume was deleted?
- A. Online Help
- B. Recovery Guru
- C. Event Log
- D. Storage Array Profile
Answer: C
NEW QUESTION 17
Exhibit:
Referring to the exhibit, which three steps would you take to solve the problem shown in the event log? (Choose three.)
- A. Reinitialize the FC switch
- B. Swap out the FC cable
- C. Swap out the SFP in the controller port
- D. Move the connection to another controller port
- E. Swap out the HBA on the FC switch
Answer: A,B,C
NEW QUESTION 18
All non-I/O related activity on the storage system is recorded in the _____________. (Choose the best answer.)
- A. Cache backup device
- B. DACstore
- C. NVSRAM
- D. Event Log
- E. Storage Array Profile
Answer: B
NEW QUESTION 19
Multipath drivers provide which high-level features?
- A. They identify a failed disk and its path.
- B. They check the state of known and discovered paths and monitor host connections.
- C. They present volumes as LUNs to the hosts and allow you to take them offline.
- D. They specify the rate of data transfer and reroute host requests.
Answer: B
NEW QUESTION 20
Where does the explicit multipath driver reside?
- A. on the storage manager host
- B. on the I/O host
- C. in the controller's memory
- D. host on the storage manager client
Answer: B
NEW QUESTION 21
What are two methods for setting the host protocol configuration on the E2800 controller with a 4-port 16Gbps FC or 10Gbps iSCSI SFP+ host interface card (HIC)? (Choose two)
- A. Change the QSFP type in the HIC
- B. Set in the hardware tab using SANtricity System Manager
- C. Change the feature pack in the SANtricity System Manager.
- D. Set at the factory based on the order.
Answer: A,C
NEW QUESTION 22
If an FDE disk fails, which characteristic is required of the replacement disk?
- A. Must be loaded with DACstore
- B. Must be T10-P1 capable
- C. Must be of a greater capacity
- D. Must be FDE capable
Answer: D
NEW QUESTION 23
Where can you enter scripts in the SANtricity user interface?
- A. In the EMW on the Devices tab
- B. In the AMW on the Storage & Copy Services tab
- C. In the EMW on the Setup tab
- D. In the AMW on the Setup tab
Answer: A
NEW QUESTION 24
A customer has launched a data analytics initiative and has been transferring old data into the new data lake. The customer has discovered some data read errors during the transfer process.
In this scenario, how should the customer have avoided these data integrity issues?
- A. by deploying secure-capable drives
- B. by turning on erasure coding
- C. by turning on cyclic redundancy checks (CRCs)
- D. by ensuring that data assurance and media scan are always activated
Answer: D
NEW QUESTION 25
Exhibit button.
Referring to the exhibit, what is the reason for the errors that are shown on port 5 on the switch of one of the fabrics?
- A. twisted cables, wrong plugs, or cable material
- B. protocol errors, encoding errors, or conversion errors
- C. wrong switch configuration
- D. faulty SFPs, cables, or patch panels
Answer: B
NEW QUESTION 26
Which object provides read/write access to a Snapshot image?
- A. Snapshot group
- B. Base volume
- C. Snapshot volume
- D. Snapshot repository
Answer: C
NEW QUESTION 27
Which three factors should you consider before you install an E2860 in a data center? (Choose three)
- A. heat dissipation
- B. ambient temperatures
- C. current draw
- D. electromagnetic interference
- E. fire suppression capacity
Answer: A,B,C
NEW QUESTION 28
In the AMW, which tab provides access to Ethernet management port configuration and premium feature enablement? (Choose the best answer.)
- A. Setup
- B. Host Mappings
- C. Configuration
- D. Hardware
- E. Storage & Copy Services
Answer: A
NEW QUESTION 29
Exhibit:
Referring to the exhibit, what would you select in the search list to see all of the host selections for NetApp ESeries storage systems?
- A. SANtricity
- B. E-Series SAN Host
- C. Storage OS
- D. E-Series Controller Firmware
Answer: B
NEW QUESTION 30
......
NS0-516 Exam Questions: Free PDF Download Recently Updated Questions: https://torrentvce.certkingdompdf.com/NS0-516-latest-certkingdom-dumps.html