[Jun-2026] Download Real 350-801 Exam Dumps for candidates. 100% Free Dump Files
Prepare Important Exam with 350-801 Exam Dumps(2026)
Cisco 350-801 exam is an essential certification exam for IT professionals who work with Cisco Collaboration technologies. Passing 350-801 exam demonstrates the candidate's knowledge and competency in implementing and operating Cisco Collaboration Core Technologies. With the right preparation and training, candidates can successfully pass the exam and become certified professionals in this field.
Cisco 350-801 exam is a challenging certification exam that requires a significant amount of preparation and study. Candidates are recommended to have at least three to five years of experience working with Cisco collaboration solutions to be able to pass 350-801 exam. However, with the right preparation and study materials, candidates can successfully pass the exam and demonstrate their expertise in implementing and operating Cisco collaboration core technologies.
NEW QUESTION # 165
Which endpoint feature is supported using Mobile and Remote Access through Cisco Expressway?
- A. SSO
- B. H.323 registration proxy to Cisco Unified Communications Manager
- C. MGCP gateway registration
- D. SRST
Answer: A
NEW QUESTION # 166 
Refer to the exhibit. An administrator is asked to allow new phones to use self-provisioning Interactive Voice Response. Which change to the Universal Device Template implements this feature?
- A. Configure Idle URL with default.
- B. Configure Authentication Server URL to the authentication server.
- C. Configure the Directory URL to a valid directory.
- D. Configure Secure Information URL to info URL.
Answer: A
NEW QUESTION # 167
Which method is user to avoid toll fraud with Cisco Unified Communications Manager calls?
- A. TOLLFRAUD_APP
- B. Default zone access rules
- C. Call policy service
- D. class of service
Answer: D
Explanation:
To prevent toll fraud in a Cisco Collaboration network, you can employ various tools:
CUCM class of service (CoS)
Voice gateway toll fraud prevention application
Voice gateway class of restriction (CoR)
Cisco Unity Connection restriction rules
NEW QUESTION # 168 
Refer to the exhibit. The SDP offer/answer has been completed successfully but there is no DTMF when users press keys. What is the cause of the issue?
- A. G.729 rather than G.711ulaw was negotiated.
- B. DTMF was negotiated property in these messages.
- C. DTMF was not negotiated on the call.
- D. Payload type 110 was negotiated rather than type 101.
Answer: C
NEW QUESTION # 169
Refer to the exhibit.
An engineer is troubleshooting this video conference issue:
A video call between a Cisco 9971 in Region1 and another Cisco 9971 in Region1 works.
As soon as the Cisco 9971 in Region1 conferences in a Cisco 8945 in Region2, the Region1 endpoint cannot see the Region2 endpoint video.
What is the cause of this issue?
- A. Maximum Session Bit Rate for Immersive Video Calls is too low.
- B. Maximum Session Bit Rate for Video Calls is too low.
- C. Maximum Audio Bit Rate must be increased.
- D. Cisco 8945 does not have a camera connected.
Answer: D
NEW QUESTION # 170
On a cisco catalyst switch, which command is required to send CDP packets on a switch port that configures a cisco IP phone to transmit voice traffic in 802.1q frames tagged with the voice VLAN ID 221?
- A. Device(config-if)# switchport trunk allowed vlan 221
- B. Device(config-if)# switchport vlan voice 221
- C. Device(config-if)# switchport access vlan 221
- D. Device(config-if)# switchport voice vlan 221
Answer: D
Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960/software/release/12-
2_40_se/configuration/guide/scg/swvoip.pdf
NEW QUESTION # 171
Which SNMP service must be activated manually on the Cisco Unified Communications Manager after installation?
- A. Host Resources Agent
- B. SNMP Master Agent
- C. Cisco CallManager SNMP
- D. Connection SNMP Agent
Answer: C
Explanation:
SNMP Master Agent serves as the primary service for the MIB interface. You must manually activate Cisco CallManager SNMP service; all other SNMP services should be running after installation.
Reference:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/service/9_0/admin/CUCM_BK_C13
6FE37_00_cisco-unified-serviceability-administration-90/CUCM_BK_C136FE37_00_cisco- unified-serviceability-administration-guide_chapter_0101.html
NEW QUESTION # 172
Refer to the exhibit.
An administrator is attempting to register a SIP phone to a Cisco UCM but the registration is failing. The IP address of the SIP Phone is 10.117.34 222 and the IP 1 address of the Cisco UCM is 10.0.101.10. Pings from the SIP phone to the Cisco UCM are successful. What is the cause of this issue and how should it be resolved?
- A. The certificates on the SIP phone are not trusted by the Cisco UCM. The SIP phone must generate new certificates.
- B. An NTP mismatch is preventing connection of the TCP session between the SIP phone and the Cisco UCM. The SIP phone and Cisco UCM must be set with identical NTP sources.
- C. DNS lookup for the Cisco UCM FQDN is failing. The SIP phone must be reconfigured with the proper DNS server.
- D. An network device is blocking TCP port 5060 from the SIP phone to the Cisco UCM. This device must be reconfigured to allow traffic from the IP phone.
Answer: D
NEW QUESTION # 173
An administrator must make a pattern to route calls to two different destinations john doe@company com and jane doe@company com Which type of patterns are needed in the Cisco UCM. and what must the pattern look like?
- A. A SIP route pattern that looks like this company.com
- B. A SIP route pattern that looks like the *@company.com
- C. A regular route pattern with URI feature enable in the configuration page. The pattern must look like this:MATCH(*@company.com)
- D. A regular route pattern with URI feature enable in the configuration page. The pattern must look like this:(*@company.com)
Answer: D
NEW QUESTION # 174
An administrator works with an ISDN PRI that is connected to a third-party PBX.
The ISDN link does not come up; and the administrator finds that the third-party PBX uses the QSIG signalling method.
Which command enables the Cisco IOS Gateway to use QSIG signalling on the ISDN link?
- A. isdn switch-type primary-qsig
- B. isdn incoming-voice voice
- C. isdn switch-type basic-ni
- D. isdn switch-type basic-qsig
Answer: A
Explanation:
The switch type confiugred must be QSIG:
isdn switch-type primary-qsig
https://community.cisco.com/t5/collaboration-knowledge-base/qsig/ta-p/3126953
NEW QUESTION # 175
An engineer with ID012345678 must build an international dial plan in Cisco Unified Communications Manager.
Which action should be taken when building a variable-length route pattern?
- A. create a second route pattern followed by the # wildcard
- B. set up all international route patterns to 0.!
- C. reduce the T302 timer to less than 4 seconds
- D. configure single route pattern for international calls
Answer: C
NEW QUESTION # 176
Refer to the exhibit. An engineer configures ISDN on a voice gateway. The provider confirms that the PRI is configured with 10 channels the engineer ordered and is working from the provider side, but the engineer cannot get a B-channel to carry voice. The rest of the configuration for the serial interface and voice network is functioning correctly. Which actions must be taken to carry voice?
- A. The engineer must manually revert the order of using the channels.
- B. The engineer used a T1 interface but must use an E1 interface.
- C. The pri-group timeslots command must be 0-9 for the 10 channels because all values on a router start with 0.
- D. The engineer must activate the controller card on the voice gateway before configuring the device.
Answer: D
NEW QUESTION # 177
What is a capability provided by the Cisco Expressway Series?
- A. voice and video conferencing
- B. endpoint registration
- C. Intercluster extension mobility
- D. voice and video transcoding
Answer: D
NEW QUESTION # 178
Due to provider requirements, outgoing calls from the Enterprise to the PSTN must start with channel 1.
Which ISDN command changes the channel selection an IOS to meet this requirement?
- A. isdn protocol-emulate network
- B. isdn bchan-number-order ascending
- C. isdn incoming-voice voice
- D. isdn bchan-number-order decending
Answer: B
NEW QUESTION # 179
An administrator configures Cisco UCM to use UDP for SIP signaling and finds that an endpoint cannot make calls Which action resolves this issue?
- A. Change the phone security profile.
- B. Change the SIP profile
- C. Change the common phone profile.
- D. Change the SIP dial rules.
Answer: A
NEW QUESTION # 180
Refer to the exhibit. An engineer must modify the existing QoS policy-map statement to implement LLQ for voice traffic. Which change must the engineer make in the configuration?
- A. bandwidth 170 to priority 170
- B. bandwidth 170 to percent 170
- C. bandwidth 170 to LLQ 170
- D. bandwidth 170 to reserve 170
Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/ios/qos/configuration/guide/12_2sr/qos_12_2sr_book/llq_f or_ipsec.html
NEW QUESTION # 181
What are two requirements for deploying Directory Connector in Cisco Webex? (Choose two.)
- A. .NET Framework 3.4 installed on the Directory Connector server
- B. Active Directory with a forest functional level of 1 or higher
- C. TCP port 443 open from Directory Connector to the internet
- D. support for TLS 1.2 between Directory Connector and Webex Control Hub
- E. single sign-on between Directory Connector and Active Directory
Answer: C,D
NEW QUESTION # 182
Which two types of trunks can be used when configuring a hybrid Local Gateway for Cisco Webex Calling? (Choose Two.)
- A. OAuth-based
- B. TLS-based
- C. registration-based
- D. certificate-based
- E. authentication-based
Answer: B,C
Explanation:
These are the two types of trunks that can be used when configuring a hybrid local gateway for Cisco Webex Calling1. A TLS-based trunk uses Transport Layer Security (TLS) to secure the SIP signaling between the hybrid local gateway and Webex Calling1. A registration-based trunk uses SIP registration to authenticate the hybrid local gateway with Webex Calling and receive calls from the cloud1.
NEW QUESTION # 183
An administrator would like to set several Cisco Jabber configuration parameters to only apply to mobile clients (iOS and Android). How does the administrator accomplish this with Cisco Jabber 12.9 and Cisco UCM 12.5?
- A. Assign the desired configuration file to "Mobile" Jabber Client Configuration in the Service Profile.
- B. Deploy jabber-config-user.xml on iOS and Android devices.
- C. Create a user profile in Jabber Policies.
- D. Upload the jabber-config.enc file to TFTP
Answer: A
NEW QUESTION # 184
An end used at a remote site is trying initiate an ad hoc conference call to an end user at the main site the conference bridge is configured to support G.711 remote user phone only support
G.729 the remote end user receives an error message on the phone "cannot complete conference call, what is the cause of the issue?
- A. The transcoder resource is missing.
- B. A Media Termination Point is missing
- C. The remote phone does not have the conference feature assigned.
- D. A software conference bridge is not assigned
Answer: A
NEW QUESTION # 185
How can an engineer determine location-based CAC bandwidth requirements for Cisco Unified Communications Manager?
- A. Execute the Resource Reservation Protocol to return location-based requirements.
- B. Set the requirements in the service parameters.
- C. Calculate the number of calls against the license for Cisco Unified Border Element to determine calls per location.
- D. Add the requirements for each audio and video codec and multiply how many calls must be supported.
Answer: B
Explanation:
Section: QoS
Explanation
NEW QUESTION # 186
Drag and Drop Question
According to the QoS Baseline Model, drag and drop the applications form the left onto the correct per-Hop Behavior values on the right.
Answer:
Explanation:
Explanation:
QoS Baseline Model (11 Class)
Voice: Refers to voice only, and it is marked with EF and limited to 10 percent of link bandwidth in a strict-priority queue.
Interactive Video: Refers to voice and video, and it is marked with AF41 or sometimes as EF and limited to 13 percent of link bandwidth.
Call Signaling: Marked with CS3 and provisioned with a minimum of 2 percent of link bandwidth.
Network Management: Marked with CS2 and provisioned as guaranteed 2 percent of link bandwidth.
Bulk Data: Marked with AF11 and provisioned with 10 percent of link bandwidth with WRED enabled.
https://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/WAN_and_MAN/QoS_SRND/QoS- SRND-Book/QoSIntro.html
NEW QUESTION # 187
Refer to the exhibit. An administrator configured a codec preference list with G.722 and ILBC codecs. Which change must the administrator make in the dial-peer section of the configuration to use this list?
- A. add voice-codecs 20
- B. add session codec 20
- C. add codec preference 20
- D. add voice-class codec 20
Answer: D
Explanation:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/voice/cube/configuration/cube-book/voi-negt- aud-code.html
NEW QUESTION # 188
Refer to the exhibit.
What is a possible cause of the PRI issue?
- A. The framing is configured incorrectly.
- B. The controller shut down.
- C. The clock source is incorrect.
- D. The cable is unplugged.
Answer: C
NEW QUESTION # 189
Refer to the exhibit.
A customer submits this output, captured on a Cisco IOS router. Assuming that an MGCP gateway is configured with a ISDN BRI interface, which BRI changes resolve the issue?
A)
B)
C)
D)
- A. Option B
- B. Option D
- C. Option C
- D. Option A
Answer: C
NEW QUESTION # 190
......
Cisco 350-801 certification exam consists of 60 to 70 multiple-choice and simulation questions. 350-801 exam duration is 120 minutes, and the passing score is 825 out of 1000. 350-801 exam can be taken in English or Japanese, and the registration fee is $400. 350-801 exam is conducted in Pearson VUE testing centers, and candidates can register for the exam through the Pearson VUE website.
350-801 Questions - Truly Beneficial For Your Cisco Exam: https://torrentvce.certkingdompdf.com/350-801-latest-certkingdom-dumps.html